모든 항목
aP8910A - Standard CMOS process
| 회사 : | Apuls Intergrated Circuits |
|---|---|
| 꾸러미 : | SOP16 |
| 제품 : | 집적 회로 (IC) |
| Datasheet: | |
| RoHs Status: | Lead free / RoHS Compliant |
| 재고: | 75 |
양
제품문의하기
AP8910A 제품 상세 정보
FEATURES
· Standard CMOS process.
· Embedded 512K/256K bits EPROM.
· 21/10 sec Voice Length at 6KHz sampling and 4-bit ADPCM compression.
· Maximum 12 voice groups.
· Combination of voice blocks to extend playback duration.
· 960 table entries are available for voice block combinations.
· User selectable PCM or ADPCM data compression.
· Two triggering modes are available (EPROM programmable options). - Key Trigger Mode
– Combinations of S1 ~ S4 to trigger 12 Voice Groups; SBT sequential trigger is possible. - CPU Parallel Trigger Mode
– Combinations of S1 ~ S4 with SBT goes HIGH to strobe start the voice playback.
· Voice Group Trigger Options: Edge / Level; Hold / Un-hold; Retrigger / Non-retrigger.
· Whole Chip Options: Ramp / No-ramp; Output Options; Key / CPU trigger mode.
· 16ms (@ 8KHz sampling rate) Debounce Time in Key Trigger Mode.
· 65us (@ 8KHz sampling rate) Debounce Time in CPU Parallel Trigger Mode.
· RST pin set to HIGH to stop playback at once.
· Two user programmable outputs for STOP pulse, BUSY signal and flashing LED.
· Built-in oscillator to control sampling frequency with an external resistor.
· 2.6V – 5.0V; Wide range single power supply and < 5uA low stand-by current.
· PWM Vout1 and Vout2 drive speaker directly.
· D/A COUT to drive speaker through an external BJT.
· Development System support voice compilation and options selection.
DESCRIPTION
aP8921A/10A series high performance Voice OTP is fabricated with Standard CMOS process with embedded 512K/256K bits EPROM. It can store up to 21/10sec voice message with 4-bit ADPCM compression at 6KHz sampling rate. 8-bit PCM is also available as user selectable option. Two trigger modes, simple Key trigger mode and Parallel CPU trigger mode facilitate different user interface. User selectable triggering and output signal options provide maximum flexibility to various applications. Built-in resistor controlled oscillator, 8-bit current mode D/A output and PWM direct speaker driving output minimize the number of external components. PC controlled programmer and developing software are available.
(제품 이미지: Pinout)
(제품 이미지: Diagram)
기술적 인 매개 변수
- 회사
- APLUS
- 포장
- Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
- RoHs Status
- Lead free / RoHS Compliant
- 꾸러미
- SOP16
AP8910A 특수 제품에 대한 관련
평가 및 리뷰
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
- 지불:
- 배송:
배송 & 지불
배송
- 전송 모드
- 선박
- 배달
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
지불
- 지불 방법
- 지급 수수료
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
우리는 높은 품질의 제품, 사려 깊은 서비스와 판매 보증 후를 제공
-
우리는 당신의 다양한 요구를 충족시킬 수, 다양한 제품이있다.
-
최소 주문 수량은 1PCS에서 시작됩니다.
-
최저 국제 운송 요금은 $ 2.00 미국에서 시작합니다.
-
모든 제품에 90 일 품질 보증.
포장
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
보장
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that AP8910A is the original manufacturer or agent of APLUS?
- We have a professional business development department to strictly test and verify the qualifications of APLUS original manufacturers and agents. All APLUS suppliers must pass the qualification review before they can publish their AP8910A devices; we pay more attention to the channels and quality of AP8910A products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of AP8910A chips? Including APLUS original factory information, application, AP8910A pictures?
- You can use Jotrin's intelligent search engine, or filter by 집적 회로 (IC) category, or find it through Apuls Intergrated Circuits Information page.
- Q: Are the APLUS's AP8910A price and stock displayed on the platform accurate?
- The APLUS's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for AP8910A, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of AP8910A?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the AP8910A we delivered, we will accept the replacement or return of the AP8910A only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of AP8910A.
(3)The AP8910A is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as AP8910A datasheet pdf, AP8910A pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Apuls Intergrated Circuits
-
AP501 PCS-band 4W HBT Amplifier Module,RF Amplifier 1930-1990MHz 32.5dB Gain... -
AP512 UMTS-band 8W HBT Amplifier Module,RF Amplifier 2110-2170MHz 28.5dB Gai...
-
AP601-F High Dynamic Range 1.8W 28V HBT Amplifier,RF Amplifier 800-2400MHz 13.... -
AP603-F High Dynamic Range 7W 28V HBT Amplifier,RF Amplifier 800-2200MHz 11.8d... -
AP504 DCS-band 4W HBT Amplifier Module,RF Amplifier 1705-790MHz 31.5dB Gain
-
AP561-F RF Amplifier 8W WIMAX POWER AMP 2.3-2.9GHZ
국제 인증
