Power Monitoring IC measures AC power in real-time.
업데이트 시간: 2020-01-13 14:39:12
MCP39F501 power monitoring device offers complete, power monitoring functionality solutions for consumer, commercial and industrial products
This device is a highly integrated, single-phase power-monitoring IC designed for real-time measurement of AC power. It includes two 24-bit delta-sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible two-wire interface. An integrated low-drift voltage reference in addition to 94.5 dB of SINAD performance on each measurement channel allows accurate designs with just 0.1% error across a 4000:1 dynamic range.
The MCP39F501 power monitoring IC allows designers to add power monitoring to their applications with minimal firmware development. Its performance enables designs capable of 0.1% error over a wider dynamic range and superior light load measurement versus current competing solutions. In an effort to improve power management schemes in power-hungry applications, such as data centres, lighting and heating systems, industrial equipment and consumer appliances, power-system designers are driving the need for enhanced power monitoring solutions. This includes requirements for better accuracy across current loads, additional power calculations and event monitoring of various power conditions. The built-in calculations include active, reactive and apparent power, RMS current and RMS voltage, line frequency, power factor as well as programmable event notifications.
The MCP39F501 device enables high-performance, cost-effective designs in the commercial (e.g. server and networking power supplies, power distribution units, lighting systems); consumer (e.g. appliance and smart plugs); and industrial markets (e.g. power meters and industrial equipment), among others. Additionally, the wide operating temperature range from -40°C to +125°C allows the MCP39F501 to be utilised in more extreme environments, such as industrial machinery applications.
"Government regulations, technology innovations and end customer expectations are driving the need for better power monitoring solutions in consumer, commercial and industrial products," said Bryan J. Liddiard, marketing vice president of Microchip's Analog and Interface Products Division.
"The MCP39F501 will allow our customers to add advanced power monitoring capabilities to their applications with nominal effort."
The MCP39F501 is available now for sampling and volume production in 28-lead QFN 5 mm x 5 mm packages. It is supplied in 5,000-unit quantities.
About Microchip Technology
Microchip Technology Inc. (NASDAQ: MCHP) is a leading provider of microcontroller, mixed-signal analog, and Flash-IP solutions, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality.
특수 제품에 대한 관련
MCU QFN >
Ethernet Controller, 100 Mbps, IEEE 802. >
MCU 8-bit AVR RISC 16KB Flash 2.5V/3.3V/ >
MCU 32-bit ARM926EJ-S RISC 512KB Flash 1 >
LIN Transceivers LIN Transceiver >
Low Speed/Full Speed/High Speed 2-Port U >
Charge Pump INV -3V to -18V 40mA Automot >
Dual Low Side MOSFET Power Driver, 1.5A, >
1.5GHz Precision, LVDS 1:5 Fanout with 2 >
512 Kbit / 1 Mbit / 2 Mbit / 4 Mbit (x8) >
Class 1 Bluetooth® Module Perfect for Ba >
Microcontroller PIC/DSPIC, PIC32 Family >
16-bit General Purpose Microcontroller w >
80 PIN, 128 KB ENH FLASH, 3936 RAM, 40 M >
8 Bit MCU, Flash, PIC18 Family PIC18F K2 >
- MIC5205-3.3YM5 TR
- LMC7101BYM5 TR